
Front loader Belarus MP-320 includes Belarus 320.4 base tractor and loading equipment. This model equipped with reliable Italian Lombardini engine which special features are low-pollution emissions (Euro 3A standards) and high performance with low operating expenses.
Front loader is used to carry out handling operations and transport loose goods for short distances, level sites, refill trenches with loose ground, clean roads, footpaths and squares from refuse and fresh snow.
Engine |
|
---|---|
Type | Four-stroke diesel |
Model | LOMBARDINI LDW1603/B3 |
Power, KW (h.p.) | 26,5 (36,0) |
Rated Speed, rpm | 3000 |
Number of Cylinders, pc | 3 |
Torque, Nm (kg force) | 92 |
Factor of Torque Backup, % | 12 |
Fuel Tank Capacity, l | 32 |
Category | 0,6 |
Emission standard | Euro-3A |
Transmission |
|
---|---|
Clutch | single-disk, friction-type, constantly-closed |
Gearbox | mechanical, step-by-step |
Number of Gears | |
forward/ backward | 8/4 or 16/8 |
Speed, km per hour: | |
forward/backward | 1,0-25,2/1,8-13,3 |
Rear PTO: | |
dependant I, rpm | 540 |
dependant II, rpm | 1000 |
synchronous I, rpm of track | 3,4 |
synchronous II, rpm of track | 6,3 |
Brakes |
|
---|---|
Type | disks, wet, mechanical (separate control) |
Dimensions and Weight |
|
---|---|
Base Chassis | tractor Belarus 320.4/ 320/4M |
Lifting Capacity, kg | 300 |
Bucket Volume, m3 | 0,25 |
Maximum Dump Height, mm | 2300 |
Maximum Digging Depth, mm | 100 |
Attachable Equipment Weight, kg | 290 |
Dimensions, mm | |
length | 4650 |
width | 1800 |
height | 2370 |
Operating Weight, kg | 2250 |
Hydraulic Linkage System |
|
---|---|
Type | Remote-Cylinder |
Lifting Capacity from the suspension axle, kg | 1100 |
Maximum Pressure, kg force/cm2 | 200 |
Pump Productivity, l/min | 17 |
Hydraulic System Capacity, l | 10 |
Front Drive Axle: Portal, Self-Locking Differential.
Steering Control: Hydrostatic, with Flow Control Pump – based Hydraulic Booster.
Cabin: safe and comfortable.
Complete package includes: working headlamps, two pairs of hydraulic linkage leads for additional mechanisms, mechanical rear mount clamp.